Play Scenes:
1. Deselect all fixtures. All LEDs next to the 4 fixture buttons must be OFF.
2. Select the correct page by pressing the Page button.
3. To select the desired scene press the Scene button.
4. Scenes can be stored on 2 pages. Each page contains 8 scenes.
**Multiple scenes can be mixed together**
By pressing the Page button between 1 & 2 you can see which scenes are still active on which page. The LEDs
will be lit on the active scenes.
Delete a Scene:
1. Press and hold the Record button for 5 seconds to enter the Programme Mode.
2. Select the page with the scene you wish to delete.
3. Press and hold the TAP/SYNC button. Now press the corresponding Scene button that you want to delete.
4. All LEDs will flash, indicating your scene has been deleted.
5. Press and hold the Record button for 5 seconds to exit Programme Mode.
Record a Chase:
1. Enter Record mode by pressing and holding the Record button for 5 seconds until red LED is lit.
2. Select the correct page by pressing the Page button.
3. Select the desired chase by pressing Chase button 1-8.
4. Select the desired fixture by pressing Fixture 1-4.
5. Set the faders to the desired values.
6. Press the Record button. All LEDs will flash 3 times, indicating your operation has been successful.
7. The display will show 01, meaning Step 1 in your chase has been recorded.
8. For further steps repeat 5, 6 & 7 until you have completed all the desired steps in your entire chase.
9. Exit Record Mode.
More than one fixture can be programmed or selected when creating steps.
Playing a Chase:
1. Deselect all fixtures. All LEDs next to the 4 fixture buttons must be OFF.
2. Select your desired chase by pressing the Chase button.
3. By using the Mode/Up button you can select Auto Mode, Music or Manual Modes. In Auto mode you
can use the Speed and Fade slider and Strobe button. In music mode you can use the Audio fader. In
manual mode you can use the TAP/SYNC button.
Delete a Chase.
1. Enter Record Mode by pressing the Record button.
2. Select the correct page by pressing the Page button.
3. Press & hold the TAP/SYNC button. Now press the corresponding Chase button that you wish to delete.
4. Exit Record Mode by pressing the Record button for approx. 5 seconds.
Add an Extra Step to an Existing Chase.
1. Enter Record Mode by pressing the Record button for approx. 5 seconds.
2. Select the chase you want to add a step to.
3. Use the Mode/Up and Patch/Down buttons to scroll through the chase. The display will show the
current step.
4. Select the fixture you want to programme by pressing the desired Fixture button.
5. Set the faders to the desired values.
6. Press the Record button to save a new step. All LEDs will flash 3 times, indicating your operation has
been successful.
(10 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce