Cobra 777 Provozní pokyny stáhnout pdf (Strana 9)

N W ih

Nothing comes close to a Cobra

Settings

our Detector

English

What To Remember While Using IntelliMute

IntelliMute works with all City and Auto Mute modes.

Whenever engine revs are below the activation point, an arrow

pointing down will appear in the display. Above the activation point,

an arrow pointing up will appear.

If, for any reason, the unit stops sensing your engine’s revs,

IntelliMute will indicate an error and automatically turn off.

The rev point you set will be stored in the unit’s memory when

power is turned off and recalled each time the power is turned on.

NOTE

The rev point must be reset if you use your detector in a different vehicle.

NOTE

When initially choosing your IntelliMute activation point, a setting

of approximately 300 to 600 RPMs above idle is recommended.

You can reset the activation point at any time to fit your individual

preferences and driving style.

Setting The IntelliMute Activation Point

Your detector must be installed in your vehicle.

CAUTION

Do not attempt to set the rev point while driving.

Your vehicle should be parked and idling.

IntelliMute must be turned on before setting the activation point.

Below Activation Point

NW ih

Above Activation Point

NW ih

Settings

Your Detector

IntelliMute

IntelliMute is a unique new feature that allows you to avoid alerts you

don’t need to hear because you are stopped or moving slowly. By sensing

the “revs” (RPMs) of your engine,

IntelliMute knows when you are at low

speed and automatically mutes alerts (except for strobe signals from

emergency vehicles).

Before IntelliMute will work, you must set an activation point for your engine’s

revs (see page 15). Whenever the revs are below that point, IntelliMute will

begin muting. The activation point will be stored in memory and recalled

each time the power is turned on. An

i will appear in the display when

IntelliMute is on. The factory setting is IntelliMute off.

NOTE

IntelliMute may not work with some vehicles because it cannot sense

the engine’s revs. In such cases, you can reduce unwanted audio alerts

by using Auto Mute and City mode when appropriate.

To Turn IntelliMute On Or Off Using Program Mode

(See Page 7 For Instructions On Using Program Mode)

In Program mode,

go to IntelliMute.

Tone Visual Display Voice

Two (2) beeps IntelliMute On,

then i appears

in the display

IntelliMute On

One (1) beep IntelliMute Off IntelliMute Off

IntelliMute On

Intelli

Mute

IntelliMute Off

Intelli

Mute

Off

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Komentáře k této Příručce

Žádné komentáře

Cobra 777 Provozní pokyny Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Radarové / lidarové detektory Cobra 777