Cobra MPC SERIES Uživatelský manuál stáhnout pdf (Strana 4)

SPECIAL PROGRAMMING SECTION:

CODELOCKS CL5000

CHANGE MASTER CODE KEY

Key Sequence: # Master Code: Enter length of Master Code Followed by new

Master Code (eg 6, 123456) Conﬁrm length of Master Code followed by new

Master Code (eg 6, 123456) Result: Master Code now changed to #123456. Note:

If the length of the Master Code is changed, then all previous User Codes will be

deleted

Add/Change Sub-Master: (Program 13)

Key Sequence: #Master Code, 13, Sub-Master Code (eg 2468) Result: A Sub-

Master Code #2468 has been entered

Delete Sub-Master Code: (Program 14)

Key Sequence: #Master Code, 14, 14. Result: Sub-Master Code has been

deleted

Enter New User Code: (Program 01)

Key Sequence: #Master Code, 01, User Code ID (eg 05), New Code (eg 4321)

Result: New Code 4321 entered as User Code ID 05 (when user enters code)

One Time User Codes: (Program 07)

Key Sequence: #Master Code, 07, One time code ID (eg 81), One time Code

(eg 4321) Result: Code 4321 in position 81 will work once and then be removed

from memory Note: ID Positions 81 to 90 reserved for program functions, allowing

up to 10 One-Time User Codes.

Suspend User Code: (Program 02)

Key Sequence: #Master Code, 02, User Code ID (eg 05) Result: User Code at

ID 05 suspended (when user 05 enters code)

Restore User Code: (Program 03)

Key Sequence: #Master Code, 03, User Code ID (eg 05)

Result: User Code at ID 05 restored (when user 05 enters code)

Suspend All User Codes: ( Program 04)

Key Sequence: #Master Code, 04. Result: All User Codes suspended (when all

users enter code)

Restore All User Codes: (Program 05)

Key Sequence: #Master Code, 05. Result: All User Codes restored (when all

users enter code)

Delete All User Codes: (Program 12)

Key Sequence: #Master Code, 12, 12, (7 secs). Result: All

User Codes will be cleared from the memory

Set Passage Mode: ( Program 08)

Key Sequence: #Master Code, 08. Result: Lock will be

continuously unlocked

Cancel Passage Mode: (Program 09)

Key Sequence: #Master Code, 09. Result: Lock will

revert to normal operation

RESET TO FACTORY DEFAULT:

Remove 1 battery. Press and hold ‘0’ button. Blue LED will

ﬂash twice, and beep will sound twice.

Release the ‘0’

button. Within 3 seconds, press the ‘*’ button 3 times.

Blue LED will light continuous-

ly for 7 seconds, then 2 beeps

will sound. lock will revert to

factory set Master, #-1-2-3-4,

and all other settings will be

erased.

ANSI/BHMA Grade n/a

UL/ULC fire rating Listed

Clutched Lever Freely rotates until proper

code is entered

Available as Cylindrical

Lever Handing Non-handed

Field reversible? Yes

Key Override: Yes

Optional: No

Key Function: Lock cylinder provides

emergency override and

change between passage

and code required

Keypad Layout Telephone Style,

12-button

Button Construction Stamped stainless steel

Code Hierarchy Master, Sub-master

(optional), User Codes

Master Code 1, must start with #

Number Of Digits 4, 5 or 6

Factory Default

Master

#-1-2-3-4

Sub-master Codes One, must start with #

Number Of Digits Same as Master Code

User Codes. Up to 80

number of digits Same as Master Code

Single use (Service

code)

Up to 10

Successful Entry Blue LED blinks twice and

two beeps

Levels of access Code Required, Passage,

Lockout

Lock-out/down Suspend all users

Overridden by Master or Sub-master

Programming

Capabilities

Master Code cannot gain

entrance

Master All functions/Sub-Master

optional

Notes: Programming a code each button press

must be entered in 5 seconds, or red LED will

flash, beep and lock will revert to normal.

Codes on hold Suspend all users

Anti-Tamper Entering 3 incorrect User

codes will cause lock

to suspend activity for

10-second penalty

Weatherized model Weather resistant

Battery Life Over 200,000 operations

Low Battery

Warning

Red LED will flash 5 times

before the Blue LED blinks

twice and beeps twice to

signal acceptance of the

code. Batteries should be

changed as soon as this

happens.

Batteries Four AA Alkaline

Battery Location Inside back cover

Warning: Non-volatile memory

50 — LOCKSMITH LEDGER [11/10] www.locksmithledger.com

1 2 3 4 5 6 7 8 9 10

Komentáře k této Příručce

Žádné komentáře

Cobra MPC SERIES Uživatelský manuál Strana 4

Komentáře k této Příručce